FREE Shipping For USA.
You have %itemCount% in your cart. Total being %total%
Color temperature The model without remote control is single color temperature variant (white light 6000K) (warm white light 3000K) The remote control model has 3 color temperatures that can be switched about: (white light 6000K) (natural light 4500K) (warm white light 3000K) Specification Material: ABS shell + PC lampshade Voltage: 3.7 (V) Battery capacity: 50W (1500mAH) 80W (3000mAh) 120W (5200mAh) Solar panels: 50W (6V-1.5W) 80W (6V-2.5W) 120W (6V-4W) Waterproof grade: IP65 Control method: human body induction + light control induction + remote control + lamp body button Charging time: about 6H Working hours: 8-10H Note: Only 120W lamps have USB charging function
DAYTIME AUTOMATIC CHARGING(CHARGING TIME 5-6H) NIGHT AUTOMATIC LIGHTING (8-10 HOURS LIGHTING)
3 SENSING MODES MODE1:Low Light+ Motion Sensor Mode The lights don't turn on during the day, and when someone passes by at night, the lights turn to dimly lit for 20 seconds without induction. MODE2:Motion sensor mode The lights do not turn on during the day, when someone passes by at night, it turns on completely, and when no one is there, it automatically turns off within 20 seconds. MODE3:Light Control Mode No lights during the day, slightly bright at night, and the human body sensing function is not activated. Detection range: 4-10M /Detection angle: 120° The greater the range of human motion, the closer the sensing distance REMOTE CONTROL DISTANCE6~8M Multiple working modes ON/OFF First turn on the green power button on the lamp body to activate 4 MODES M1: Lights up when people pass by, slightly brighter when people leave M2: All lights on when people pass by, all lights off when people leave M3: 20% light all on at night without induction EM: Lights all day, no induction COLOR TEMPERATURE Warm white light/natural light/white light (One-key switch of color temperature) Recommended installation height is 3-3.5 m 1: measure paper stick on the wall and punch holes 2: The expansion rubber plug is inserted into the hole 3:Screw in the screws with reserve of about 5-8mm 4: Installation is complete
USB CHARGING(120W)
This site requires cookies in order to provide all of its functionality.